7 contact us – Banner SureCross DX80 Wireless Networks User Manual
Page 42

Initialization Pins
To restore these settings, leave the device powered up and running and
follow these steps:
1. Open the DX80 GatewayPro or DX83 Ethernet Bridge housing to
access the board
2. Install the initialization (init) jumper on the pins shown
3. Wait 60 seconds
4. Remove the jumper
5. Cycle power to the device
Using the configuration Web page, verify the parameters have returned
to the factory defaults listed in the table.
9.7 Contact Us
For more information: Contact your local Banner representative or Banner Corporate Offices around the world.
Corporate Headquarters: Banner Engineering Corp. 9714 Tenth Ave. North, Minneapolis, MN 55441, Tel:
763-544-3164,
Europe:
Banner Engineering Europe Park Lane, Culliganlaan 2F, Diegem B-1831 BELGIUM, Tel: 32-(0)2 456 07 80, Fax:
Banner Engineering Turkey Barbaros Mah. UpHill Court Towers A Blok D:49 Batı Atasehir - Istanbul TURKEY, Tel:
Latin America: Contact Banner Engineering Corp. (US) or
Banner Engineering de Mexico: Edificio VAO, Av. David Alfaro Siqueiros No.103, Col. Valle Oriente C.P. 66269, San
;
Brazil:
Asia:
Banner Engineering China Shanghai Rep Office Xinlian Scientific Research Building, Level 12, Building 2, 1535
Hongmei Road, Shanghai 200030 CHINA, Tel: 86-21-33986888, Fax: 86-21-33986999,
Banner Engineering India Pune Head Quarters Office, No. 1001 Sai Capital, Opp. ICC Senapati Bapat Road, Pune
,
Banner Engineering Japan Cent-Urban Building 305 3-23-15, Nishi-Nakajima Yodogawa-Ku, Osaka 532-0011 JAPAN,
Tel: 81-(0)6-6309-0411, Fax: 81-6-6309-0416,
Banner Engineering Korea 8th Fl., CM Bldg, 32-7, Songpa-Dong Songpa-Gu, Seoul, REPUBLIC OF KOREA 138-849,
Banner Engineering Taiwan Office 8F-2, No. 308, Sec. 1, Neihu Rd. Taipei, TAIWAN 114 Tel: +886 (0)2 8751 9966,
Host Controller Systems
42