Metrohm 753 Suppressor Module - Manual (Page 6)

1.2 Parts and controls
753 Suppressor Module / 8.753.1003 Instructions for Use
3
WARNING - Fire Hazard -
with the same type and rating of fuse
For continued protection replace only
Type 1.753.0010 Nr.
Made by Metrohm Herisau Switzerland
14 14 13 13
19 19 15 15
Remote
110V-120V
220V-240V
0,5A(T)
0,25A(T)
50 - 60 Hz 50 VA
Pump Suppr.
Suppressor Breakpoint
∆∆t
A
C B
20 20 16 16 17 17 18 18
S
Fig. 2: Rear of the 753 Suppressor Module
13 13 Mains switch
For switching the instrument on/off:
I = ON 0 = OFF
17 17 Connection for suppressor block
14 14 Serial number 18 18 Adjustment screw for braking
range
15 15 Remote interface for pump
Remote I/O lines for connection of
external devices (e.g. 732 IC Detector)
19 19 Mains connection plug
Mains connection, see section 2.2
16 16 Remote interface for suppressor
Remote I/O lines for connection of
external devices (e.g. 732 IC Detector)
20 20 Fuse holder
Changing the fuses, see section 2.2