Metrohm 870 KF Titrino plus Manual - Manual (Page 93)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
11 Technical specifications
870 KF Titrino plus
￭￭￭￭￭￭￭￭ 83
11 Technical specifications
11.1 Measuring inputs
The measuring cycle is 100 ms for all measuring modes.
11.1.1 Polarizer
A measuring input (Pol.) for polarizable electrodes.
Measuring mode
Ipol Determination with adjustable polarization current.
Polarization
current –120 - +120 µA (increment: 1 µA)
–125 - –121 µA / +121 - +125 µA: non-guaranteed values, dependent
on reference voltage +2.5 V
Measuring
range –1,200 - +1,200 mV
Resolution 0.1 mV
Measuring
accuracy ±0.2 mV
(±1 digit, without sensor error, under reference conditions)
Measuring mode
Upol Determination with adjustable polarization voltage.
Polarization
voltage –1,200 - +1,200 mV (increment: 10 mV)
–1,250 - –1,210 mV / +1,210 - +1,250 mV: non-guaranteed values,
dependent on reference voltage +2.5 V
Measuring
range –120 - +120 µA
Resolution 0.01 µA
Measuring
accuracy –