Metrohm 870 KF Titrino plus Manual - Manual (Page 23)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Installation
870 KF Titrino plus
￭￭￭￭￭￭￭￭ 13
The following devices can only be connected to a 6.2147.000
numerical keypad or to a USB hub:
￭ Printer (with USB connector, use the 6.2151.020 connecting cable)
￭ Barcode reader (with USB cable)
￭ Mouse (PC mouse with USB cable, for navigating in the dialog)
The following devices can only be connected to a USB hub:
￭ PC keyboard (with USB cable, for the comfortable input of letters and
numbers)
￭ Keypad with numerical keypad (with USB cable)
If you wish to connect several different instruments without own
power supply, then you must possibly use a USB hub with own power
supply (self powered). The USB (OTG) connector of the 870 KF Titrino plus
is not designed for supplying power to several devices with elevated elec-
tricity requirements.
Also observe the instructions in chapter 10.4, page 72.
Examples:
USB MINI (OTG)-USB
USB stick
6.2151.100
Figure 8 Connecting the USB stick
USB MINI (OTG)-USB
USB stick
Keypad
6.2147.000
6.2151.100
Printer
Figure 9 Connecting the 6.2147.000 USB keyboard with USB stick and
printer