Metrohm 870 KF Titrino plus Manual - Manual (Page 52)

6.2 Managing solutions
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
42 ￭￭￭￭￭￭￭￭
870 KF Titrino plus
Selection on | off
Default value on
6.2 Managing solutions
6.2.1 General
Menu ▶ System ▶ Solutions
Solutions can be used in intelligent buret units or in non-intelligent buret
units. Intelligent buret units have a built-in data chip on which the data for
the reagent is stored. This data is automatically read out during attach-
ment and entered in the solution list.
The name and the type are specified for each solution in the solution list.
The asterisk (*) on the right-hand side indicates that this buret unit is
attached (only for intelligent buret units). An unlimited number of solu-
tions in buret units with data chip can be added to the solution list. The
number of solutions in buret units without data chip is limited to 10 items.
Meaning of the type:
￭ EU: exchange unit without data chip
￭ IEU: exchange unit with integrated data chip
not defined is the standard solution. It can be used to carry out determi-
nations without having configured a solution. If you carry out a titer deter-
mination with the titration parameter Solution = not defined, then the
result will be saved as titer of this solution. If you carry out a titration with
the titration parameter Solution = not defined, then the data of this
solution will be used for the calculation. The titer and the concentration
can be edited, but this standard solution can neither be renamed nor
deleted.
Edit
Edit the data of the selected solution, see following chapter.
New
Add a new solution to the list, see following chapter.
Delete
Delete the selected solution from the list.