Metrohm 870 KF Titrino plus Manual - Manual (Page 20)

4.3 Connecting a stirrer
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
10 ￭￭￭￭￭￭￭￭
870 KF Titrino plus
NOTE
The electrode cable is protected against accidental disconnection of the
cable by means of a pull-out protection feature. If you wish to remove
the plug, then you must first retract the outer plug sleeve.
4.3 Connecting a stirrer
You can connect the following stirrers:
￭ 801 Stirrer
￭ 803 Ti Stand
￭ 804 Ti Stand (requires rod stirrer)
Figure 5 Connecting a stirrer
CAUTION
Make sure that the flat side of the plug matches the marking on the
socket.