4 usb devices, 1 6.2147.000 numerical usb keypad, 2147.000 numerical usb keypad – Metrohm 870 KF Titrino plus Manual User Manual
Page 82

10.4 USB devices
■■■■■■■■■■■■■■■■■■■■■■
72
■■■■■■■■
870 KF Titrino plus
Mettler AX
For the Mettler AX balance, the fields that contain the sample identifica-
tion or the method must be designated as follows:
■
Designation for the field with the method name: METHOD
■
Designation for the field with sample identification 1: ID1
■
Designation for the field with sample identification 2: ID2
10.4
USB devices
NOTE
USB peripheral devices that are to be connected must support either
the USB 1.0/1.1 (Full Speed) or the USB 2.0 (High Speed) standard. The
maximum data transfer rate is however in any case 12 MBit/s.
Keyboards, PC mice and barcode readers are so-called HID devices
(Human Interface Device) and can be connected via a USB hub only.
Printers should also be connected via a USB hub. Depending on the
manufacturer or printer type a direct connection is however possible.
10.4.1
6.2147.000 numerical USB keypad
The [Num Lock] key must be pressed for navigating in the dialog. The
arrow keys are effective in conjunction with it.
The respective editing dialog must be opened for the numerical input.
Table 4
Key assignment
Key of the 870 KF Titrino plus
or function in the editing dia-
log
Key on the numerical USB
keypad
[BACK]
[Home]
[
⇧] [⇩]
[
↑] [↓]
[
⇦] [⇨]
[
←] [→]
[OK]
[Enter]
[BS] (backspace)
Clear
[Del]
Accept
[Home]