DJI Phantom 2 Vision Plus User Manual - Manual (Page 38)

DJI VISION App Usage
38 © 2014 DJI. All Rights Reserved.
Items
1/74 1/74
00:00:07
00:00:22
Figure 78 Figure 79
[4] Tap the button to enter multiple synchronization mode (as shown in the following diagram). Tap thumbnails to
select photos or videos to synchronize to your mobile device (selected thumbnails are marked with a tick). Select
one or more groups to be synchronized by checking the box before the group, then tap to start synchronizing.
During the synchronization process, users can tap to cancel synchronization. Photos and videos that have
been synchronized to the mobile device will remain.
Some mobile devices cannot support the synchronization of 1080i60 video files.
[5] Tap “Cancel” or “Finished” to exit multiple synchronization mode and return to the SD Card page.
Connect camera data port to a PC via a Micro-USB cable to copy photos or videos on the SD card album from
the Micro-SD card to the PC conveniently.
4.2 Mobile Device Photo Album
[1] Browse all synchronized photos and videos in the album. Tap to view selected
photos or videos.
[2] Photos and videos are displayed using thumbnails and sorted by capture time.
[3] Pictures and videos are sorted by captured/recorded geo-tagged locations.
Internet access is required for map downloads.
Select a group
Figure 80 Figure 81
[5]
Figure 82
[1]
[4]
[3]
[2]
Figure 83
Geo-tagged
locations
Select a single
photo or video