DJI Phantom 2 Vision Plus User Manual - Manual (Page 35)

DJI VISION App Usage
© 2014 DJI. All Rights Reserved.
35
(3) Micro-SD card is damaged.
(4) Connection between the DJI VISION App and camera is broken.
[11] Shutter Button
Tap to take photos.
Single capture: press once for a single capture.
Continuous capture: press once for 3 or 5 captures.
Timed capture: press once to begin a timed capture, press again to stop.
Shutter button is disabled during video recording.
Capture modes can be reconfigured in camera settings; refer to the Camera Settings (Page35).
[12] Video Recording Button
Start and stop video recording. Tap once to start
recording. A red dot will blink to indicate recording
is in progress and a time code will appear in the top
right corner of the preview screen. Press again to stop
recording.
[13] Camera Settings
Tap to open the camera settings menu, refer to Camera
Settings (Page 35).
[14] Hide or Show Flight Parameters
Tap to hide flight parameters. Tap again to show.
Figure 71
3 Camera Settings
Figure 74 Figure 75
[1] Capture Mode [2] Photo Size [3] Video Resolution [4] Photo Format [5]ISO [6] White Balance [7] Exposure Metering [8]
Exposure Compensation [9] Sharpness [10] Anti-flicker [11] Restore Defaults [12] Format Micro-SD Card
[1] Capture Mode
Single capture.
3 captures.
5 captures.
Configurable timed capture:
a) Interval between shots (3~60 s)
b) Number of shots
(2~254, or number of picture is subject to the capacity of the memory card.)
Figure 72 Figure 73
Camera Settings
[3]
[9]
[6]
[12]
[1]
[4]
[10]
[7]
[2]
[8]
[5]
[11]