8] exposure compensation, 9] sharpness [10] anti-flicker, 11] restore defaults – DJI Phantom 2 Vision Plus User Manual User Manual
Page 37: 12] format micro-sd card, 1 sd card album, 9] sharpness, 10] anti-flicker

DJI VISION App Usage
©
2014 DJI. All Rights Reserved.
37
[1]
[2]
[3]
[4]
[8] Exposure Compensation
-2.0(EV)
2.0(EV)
-1.7(EV)
1.7(EV)
-1.3(EV)
1.3(EV)
-1.0(EV)
1.0(EV)
-0.7(EV)
0.7(EV)
-0.3(EV)
0.3(EV)
0(EV)
[9] Sharpness
[10] Anti-flicker
Standard
Anti-flicker
Hard
50Hz
Soft
60Hz
[11] Restore Defaults
Restores all default camera settings. Flight battery restart is needed to allow restoration to take effect.
[12] Format Micro-SD Card
Format the Micro-SD card. All data stored in the Micro-SD card will be lost after formatting. Remember to backup
before formatting.
4 Album Page
The DJI VISION App has an SD Card album and a Mobile Device Photo Album. Images and videos on the SD Card
album can be synchronized to the Mobile Device Photo Album.
In the DJI VISION App, tap to enter into the SD Card album and tap to enter into Mobile Device Photo Album.
Figure 76
SD Card album is accessible when the mobile device is connected to Phantom 2 Vision+ Wi-Fi.
4.1 SD Card Album
Pictures stored in the camera are presented using Thumbnails.
Tap the corresponding thumbnail to view the picture.
[1] Photos and videos are listed and grouped by date.
[2] All photos and videos that have been synced to your mobile
device are marked with .
[3] Tap any thumbnail for single view mode. Tap a Photo thumbnail
that hasn’t been synchronized to the mobile device to view the
photo. Swipe left or right to view the previous or next photo.
Tap on a video thumbnail to play it and view the video length.
A progress bar will appear at the bottom of the screen. Tap
to enter single synchronization mode to synchronize a
single photo or video, or to synchronize and play a video at the
same time.
Figure 77
SD CARD Album
Mobile Device Photo Album
Album Page