Brother DCP-6690CW - Manual (Page 58)

Chapter 5
52
Restoring all settings to the
factory settings
5
You can restore all the settings you have
changed to the factory settings. These
settings will stay until you change them again.
a
Press a or b to display
Factory Reset
.
b
Press Factory Reset.
c
Press Yes to confirm.
d
Press Stop/Exit.
Scan to a memory card
or USB Flash memory
drive
5
Entering Scan mode
5
When you want to scan to a memory card or
USB Flash memory drive, press
(Scan).
The LCD shows:
Press Scan to Media.
If you are not connected to your computer
only the Scan to Media selection is available
on the LCD.
(See Scanning for Windows
®
or Macintosh
®
in the Software User’s Guide on the CD-ROM
for details about the other menu options.)
Scan to
E-mail
Scan to
File
Scan to
Image
Scan to
OCR
Scan to
Media
SCAN SCAN