Brother DCP-6690CW - Manual (Page 16)

Chapter 2
10
c
With both hands, gently press and slide
the paper side guides (1) and then the
paper length guide (2) to fit the paper
size. Make sure that the triangular
marks (3) on the paper side guides (1)
and paper length guide (2) line up with
the mark for the paper size you are
using.
d
Fan the stack of paper well to avoid
paper jams and misfeeds.
Note
Always make sure that the paper is not
curled.
e
Gently put the paper into the paper tray
print side down and top edge in first.
Check that the paper is flat in the tray.
f
Gently adjust the paper side guides to fit
the paper with both hands.
Make sure the paper side guides touch
the sides of the paper.
Note
Be careful that you do not push the paper
in too far; it may lift at the back of the tray
and cause feed problems.
2
3
1