Brother DCP-6690CW - Manual (Page 51)

Printing photos from a memory card or USB Flash memory drive
45
5
• There are some cases when red-eye may
not be removed.
• When the face is too small in the image.
• When the face is turning too far up,
down, left or right.
• After adding each effect, you can enlarge
the view of the image by pressing . To
go back to the original size, press .
• While the image is enlarged, you can move
around the image with , , and .
Press Cancel to return to the list of
effects.
g
Adjust the red frame around your photo.
The part inside of the red frame will be
printed.
Press + or - to enlarge or reduce the
frame size.
Press a, b, d or c to move the
position of the frame.
Press to rotate the frame.
Press OK when you have finished
adjusting the frame setting.
Press OK to confirm.
Note
If your photo is very small or has irregular
proportions you may not be able to trim
the photo. The LCD will display
Image Too Small.
or
Image Too Long. .
h
Enter the number of copies you want
either by pressing the number or
pressing + or -.
Press OK.
i
Do one of the following.
Press Print Setting and change
the print settings. (See page 48.)
If you do not want to change any
settings, press Color Start to print.
Index Print (Thumbnails)
5
The PhotoCapture Center™ assigns
numbers for images (such as NO.1, NO.2,
NO.3, and so on).
The PhotoCapture Center™ uses these
numbers to identity each picture. You can print
a thumbnail page to show all the pictures on
the memory card or USB Flash memory drive.
Note
• Only file names that are 8 characters or
less will be printed correctly on the index
sheet.
• File names cannot be printed correctly if
they are Chinese. However it does not
affect any functions.
•
a
Make sure you have put the memory
card or USB Flash memory drive in the
correct slot.
Press (Photo Capture).
b
Press Index Print.
c
Press Index Sheet and choose
6 Images/Line
or 5 Images/Line.
Print time for 5 Images/Line will be
slower than 6 Images/Line, but the
quality is better.
6 Images/Line 5 Images/Line