Brother DCP-6690CW - Manual (Page 57)

Printing photos from a memory card or USB Flash memory drive
51
5
Cropping
5
If your photo is too long or wide to fit the
available space on your chosen layout, part
of the image will automatically be cropped.
The factory setting is On. If you want to print
the whole image, turn this setting to Off. If
you are also using the Borderless setting,
turn Borderless to Off. (See Borderless
printing on page 51.)
a
Press a or b to display Cropping.
b
Press Cropping.
c
Press Off (or On).
d
If you do not want to change additional
settings, press
.
Press Color Start to print.
Cropping: On
5
Cropping: Off
5
Borderless printing
5
This feature expands the printable area to the
edges of the paper. Printing time will be
slightly slower.
a
Press a or b to display Borderless.
b
Press Borderless.
c
Press On (or Off).
d
If you do not want to change additional
settings, press
.
Press Color Start to print.
Date Print
5
You can print the date if it is already in the
data on your photo. The date will be printed
on the lower right corner. If the data doesn’t
have the date information, you cannot use
this function.
a
Press a or b to display Date Print.
b
Press Date Print.
c
Press On (or Off).
d
If you do not want to change additional
settings, press
.
Press Color Start to print.
Note
The DPOF setting on your camera must
be turned off to the Date Print.
Setting your changes as a
new default
5
You can save the print settings you use most
often by setting them as the default settings.
These settings will stay until you change them
again.
a
Press and choose your new setting.
Repeat this step for each setting you
want to change.
b
After changing the last setting, press
a
or b to display Set New Default.
c
Press Set New Default.
d
Press Yes to confirm.
e
Press Stop/Exit.