Brother DCP-6690CW - Manual (Page 17)

Loading paper and documents
11
2
g
Close the paper tray cover.
Check that the paper is flat in the tray
and below the maximum paper
mark (1).
h
Slowly push the paper tray completely
into the machine.
Note
DO NOT push Tray #1 into the machine
too quickly. Doing this may cause injury to
your hand by trapping it between Tray #1
and Tray #2. Please push Tray #1 slowly.
i
While holding the paper tray in place,
pull out the paper support (1) until it
clicks and unfold the paper support
flap (2).
Note
When you shorten tray #1, take the paper
out of tray. Then shorten the tray by
pressing the universal guide release
button (1) and put the paper into the tray.
Adjust the paper length guide (2) to fit the
paper size.
1
1 1
2