Brother DCP-6690CW - Manual (Page 32)

Chapter 3
26
Sleep Mode
3
You can choose how long the machine must
be idle (from 1 to 60 minutes) before it goes
into sleep mode. The timer will restart if any
operation is carried out on the machine. The
default setting is 10 minutes.
a
Press MENU.
b
Press a
or b to display
General Setup .
c
Press General Setup.
d
Press a or b to display Sleep Mode.
e
Press Sleep Mode.
f
Press and choose 1 Min, 2 Mins,
3 Mins
, 5 Mins, 10 Mins, 30 Mins
or 60 Mins, which is the length of time
the machine is idle before entering sleep
mode.
g
Press Stop/Exit.
Beeper Volume
3
When the beeper is on, the machine will beep
when you press a key or make a mistake.
You can choose a range of volume levels,
from High to Off.
a
Press MENU.
b
Press a or b to display
General Setup .
c
Press General Setup.
d
Press Beeper.
e
Press and choose Off, Low, Med or
High
.
f
Press
Stop/Exit.