Bird Technologies 3129 Display User Manual
Page 5
iii
Caution Statements
The following equipment cautions appear in the text and are repeated here for
emphasis.
WARNING
Dangerous RF voltage. Do not connect or apply an RF signal to the BPM-E
during equipment setup. Failure to comply may result in severe burns, loss of
use of limbs, or death.
WARNING
Disconnect the unit from the RF power source and the ac line before any
disassembly. The potential for electrical shock exists.
CAUTION
BPM-E signal sensing couplers are fixed in place. Do not attempt to remove or
rotate the couplers. They are calibrated and oriented at the factory and are not
designed to be rotated or removed by the end user. Failure to comply may
result in loss of calibration and accuracy, and in permanent damage to the unit.
CAUTION
The DC voltage provided by the 3129 Digital Display power/alarm port should
only be used to power the BPM-E. Do not use the 3129 DC source to supply
power to anything else.
CAUTION
Network connections require specific address and protocol information. Have a
qualified IT or network professional perform the BPME ethernet setup. Failure to
comply may result in loss of network communication or the inability to
communicate with the BPME.
CAUTION
Do not use harsh or abrasive detergents for cleaning.