Bird Technologies 3129 Display - Manual (Page 41)

25
Note: To use the features of the WebTool software, refer to
Chapter 4 Operating Instructions on page 27.
If you access the BPM-E
using a static IP or Host
name, you can save the
webpage address in your
Favorites (a dynamic IP
may be different each time
the BPM-E connects).
When BPM-E is attached to its final
destination network or computer,
connect to it either by typing its IP
address or host name in the address
bar of your web browser, or use the
BPMEFinder with your network or
computer’s subnet mask to find and
connect to the BPME.
If computer IP address or
subnet mask were changed,
restore the original settings.
Click ‘Apply all Changes’
Setup is now
complete
E