Bird Technologies 3129 Display - Manual (Page 39)

23
Figure 13 Ethernet Connection Flowchart
Note: The name you enter (at the left of the @ symbol) is also used in
the BPM-E Finder utility. If you use the email option to notify someone
that an alarm has occurred, the name of this BPM-E will help identify
where the alarm came from.
Change your computer
IP to 169.254.x.x and
subnet to 255.255.0.0
Record the IP and subnet
address of your computer
Use a cross-over Ethernet
cable to connect BPM-E
to computer
Start the BPMFinder utility
on your computer and
enter the subnet mask
of your network
Does your
network have a
DHCP server?
Connect BPM-E to
network with a standard
Ethernet cable
Will you
connect directly
to the BPM-E
for setup?
Record the BPM-E
serial number
YES
YES
NO
NO
1. Start the BPMEFinder utility
on your computer
2. Enter the subnet mask
as 255.255.0.0
3. Click the button Find BPMEs
On Network
4. On the BPMEFinder list, click
on the serial number that
matches your unit
A
0
153363
CH 17 XMTR
SITE 7A