Bird Technologies 3129 Display - Manual (Page 48)

32
Figure 17 WebTool Config Screen, Alarms
Frequency Tab
In the Frequency view (Figure 18 on page 32), you specify monitor frequencies
and then apply that configuration to the BPM-E. Click the View Channel List button
to display a list of United States television channels and their frequencies (Figure ,
page 32). To add a frequency to the Selected Frequencies list, type it in the Fre-
quency (MHz) field, then click the Add button. To remove a frequency from the
list, click on the frequency to select it, then click on the Remove button. After you
have set the configuration frequencies, click the Configure button to record your
settings to memory. The value shown beside Configuration Frequency is the cen-
ter frequency of all of the values in the Selected Frequencies list.
Note: The changed frequencies stored in memory will not take effect
until the BPM-E power has been turned off and then back on.
Figure 18 Web Tool Config Screen, Frequency