Rockwell Automation 1606-XLP XM Electronic Overspeed Detection System - Manual (Page 59)

59 Publication GMSI10-UM015B-EN-E - June 2011
Appendix
A
Specifications
The Appendix lists the technical specifications for the XM-441 module. Refer
to the XM-220 Dual Speed Module User Guide for the technical specifications
for the XM-220 module. Refer to the 1606-XLP Power Supply Installation and
Operation manual for the technical specifications for the 1606-XLP power
supplies.
XM-441 Technical Specifications
Product Feature Specification
Communications
Side Connector All XM measurement and relay modules
include side connectors that allow
interconnecting adjacent modules, thereby
simplifying the external wiring
requirements.
The interconnect provides primary power,
DeviceNet communication, and the circuits
necessary to support expansion modules,
such as the XM-441 Expansion Relay
module.
NOTE: DeviceNet protocol, which is not used by
the XM-442, and primary power are passed
through the module’s terminal base to modules
connected on either side of the XM-442.
Indicators
3 LEDs Module Power -red/green
Shutdown Relay - red
Alarm Relay - red