Services, Analog input point object (class id 0ah), Class attributes – Rockwell Automation 1440-TPR06-00RE XM-360 Process Module User Manual
Page 98: Instances, Class attributes instances, Analog input point object (class id 0a

Publication GMSI10-UM006C-EN-P - August 2010
90 DeviceNet Objects
Services
Analog Input Point Object
(Class ID 0A
H
)
The Analog Input Point Object models simple analog measurements
performed by the XM-360 module. There are six instances of the Analog
Input Point object, one for each input channel.
Class Attributes
Instances
Table C.18 Connection Object Services
Service
Code
Class/Instance Usage
Name
05
h
Instance
Reset
0E
h
Instance
Get_Attribute_Single
10
h
Instance
Set_Attribute_Single
Table C.19 Analog Input Point Object Class Attributes
Attr ID
Access
Rule
Name Data
Type
Description
Semantics
1
Get
Revision
UINT
Revision of the
implemented object.
2
Table C.20 Analog Input Point Object Instances
Instance
Name
Description
1
Channel 1 Measurements
Process (DC) measurement and Rate of
Change for channel 1.
2
Channel 2 Measurements
Process (DC) measurement and Rate of
Change for channel 2.
3
Channel 3 Measurements
Process (DC) measurement and Rate of
Change for channel 3.
4
Channel 4 Measurements
Process (DC) measurement and Rate of
Change for channel 4.
5
Channel 5 Measurements
Process (DC) measurement and Rate of
Change for channel 5.
6
Channel 6 Measurements
Process (DC) measurement and Rate of
Change for channel 6.