Rockwell Automation 1440-TPR06-00RE XM-360 Process Module - Manual (Page 10)

Publication GMSI10-UM006C-EN-P - August 2010
2 Introduction
XM-360 Module
Components The XM-360 consists of a terminal base unit and an instrument module. The
XM-360 Process Module and the XM-944 Temperature Terminal Base are
shown below.
Figure 1.1 XM-360 Module Components
• XM-944 Temperature Module Terminal Base - A DIN rail mounted
base unit that provides terminations for all field wiring required by XM
Temperature/Process modules, including the XM-360.
• XM-360 Process Module - The module mounts on the XM-944
terminal base via a keyswitch and a 96-pin connector. The module
contains the measurement electronics, processors, and serial interface
port for local configuration.
Using this Manual This manual introduces you to the XM-360 Process module. It is intended for
anyone who installs, configures, or uses the XM-360 Process module.
PROCESS 1440-TPR06-00RE
XM-944 Temperature Module Terminal Base Unit
Cat. No. 1440-TB-E
XM-360 Process Module
Cat. No. 1440-TPR06-00RE
IMPORTANT
Up to two XM-441 Expansion Relay modules may be
connected to the XM-360 module via the XM-944 terminal
base.
When connected to the module, the Expansion Relay
modules simply “expand” the capability of the XM-360 by
providing a total of up to eight relays. The XM-360
controls the operation of the Expansion Relay modules.