Rockwell Automation Logix5000 Control Systems: Connect POINT I/O Modules over an EtherNet/IP Network Quick Start - Manual (Page 26)

26 Rockwell Automation Publication IASIMP-QS027A-EN-P - February 2012
Chapter 2 Add the POINT I/O Ethernet Adapter and Digital Output Module to an RSLogix 5000 Project
Add Ladder Logic to Test the 1734-OB4E Module’s Lights
1. In RSLogix 5000 software’s
controller organizer, expand
Tasks >MainTask>MainProgram.
2. Double-click MainRoutine.
A blank routine opens.
3. Add a new rung to the routine.
4. From the Element Toolbar,
drag and drop an Examine
On element and an Output
Energize element onto the
rung.
5. Double-click the ? in the
Examine On element.
6. Type PB for push button.
7. Press Enter.