Rockwell Automation 5370-CMPK Color CVIM Module MATH-PAK - Manual (Page 64)

A–B
5
Chapter
5–1
Analysis Functions and Runtime Displays
Contents
Chapter Objectives 5–1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Analysis Functions 5–1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Statistics (Learn Mode) for Failed Tools 5–2 . . . . . . . . . . . . . . . . . . . . . . . .
Runtime Displays 5–3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
This chapter describes the use of Analysis functions and runtime displays
with MATH-PAK installed.
The Color CVIM module’s Analysis functions allow you to obtain the
inspection processing time required for your current configuration. With
MATH-PAK installed, the analysis function calculations can also include the
formulas you have enabled and defined.
You can determine which tools are included in analyzing the processing time,
including formulas, by using the
Tool Display menu.
Figure 5.1 Selecting the Tool Display menu
Tool Display
menu
To access the Tool Display menu (see Figure 5.1):
•
Pick Misc
→
Analysis to access the Analysis menu.
•
Pick Tool Display to access the Tool Display menu.
With the Tool Display menu selected, you can see that the Formulas box
allows you to specifically analyze the formulas for processing time (see
Figure 5.1). If you pick the
All Tools box, all tools are included in the
analysis, including formulas.
Chapter Objectives
Analysis Functions