Rockwell Automation Logix5000 Controllers I/O and Tag Data Programming Manual - Manual (Page 9)

Preface
This manual shows how to access I/O and tag data in Logix5000 controllers. This
manual is one of a set of related manuals that show common procedures for
programming and operating Logix5000 controllers.
For a complete list of common procedures manuals, refer to the Logix5000
Controllers Common Procedures Programming Manual , publication 1756-
PM001 .
The term Logix5000 controller refers to any controller that is based on the
Logix5000 operating system.
The Studio 5000 Automation Engineering & Design Environment™ combines
engineering and design elements into a common environment. The first element is
the Studio 5000 Logix Designer™ application. The Logix Designer application is
the rebranding of RSLogix™ 5000 software and will continue to be the product to
program Logix5000™ controllers for discrete, process, batch, motion, safety, and
drive-based solutions.
The Studio 5000® environment is the foundation for the future of
Rockwell Automation® engineering design tools and capabilities. The Studio 5000
environment is the one place for design engineers to develop all elements of their
control system.
Studio 5000 environment
Rock well Automati on Publication 1756- PM004E -EN-P - October 2014 9