beautypg.com

Paste a pass-through description – Rockwell Automation Logix5000 Controllers I/O and Tag Data Programming Manual User Manual

Page 46

background image

Chapter 2

Organize tags

3. Check Show Pass-Through Descriptions and Append to Base Tag

Descriptions.

4. Click OK.

Paste a pass-through description

Choose this command to paste a pass-through value of an item into the

Description, Engineering Unit, State 0, or State 1 field of another item.

Follow these steps to use a pass-through description as the starting point for a
more specific description.

1. In the Controller Tags Editor, right-click the Description box, and then

click Paste Pass-Through.

2. Edit the description and press CTRL+Enter.

46

Rockwell Automation Publication 1756-PM004E-EN-P - October 2014