Rockwell Automation 1783-EMS08T Stratix 6000 Ethernet Managed Switch User Manual - Manual (Page 79)

Rockwell Automation Publication 1783-UM001D-EN-P - January 2013 79
Add the Switch to Software Appendix E
Enter Connection Information
From the Module Properties dialog box, click the Connection tab to display these
fields:
• Requested Packet Interval (RPI)—Default value is 700 ms and supports
RPI from 50…750 ms. Because this is a multicasting device and does not
need a fast RPI to fulfill its purpose, we recommend a slow RPI to
minimize network impact. Available online and offline.
• Inhibit Module—1783-EMS switch is not scanned by the Logix controller
when this is checked. Available online and offline.
• Major Fault On Controller If Connection Fails While in Run Mode—
When checked, a communication failure with the 1783-EMS switch
generates a major fault in the Logix controller. When unchecked, a
communication failure generates a minor fault. Available online and
offline.