Rockwell Automation 1783-EMS08T Stratix 6000 Ethernet Managed Switch User Manual - Manual (Page 49)

Rockwell Automation Publication 1783-UM001D-EN-P - January 2013 49
Diagnostics Chapter 3
To enable this capability, use this procedure.
1. From the navigation pane, expand the Diagnostics folder and select
Automatic Alerts.
2. From the Automatic Alerts pull-down menu, choose Enabled.
3. Specify the recipients for the alerts by typing up to six email addresses or
mobile telephone numbers.
4. Specify which alerts you want to automatically trigger a message by
checking the checkbox next to each alert.
You can select any number of automatic alerts from the list.
5. Click Apply Changes.