Email and sms error codes – Rockwell Automation 1783-EMS08T Stratix 6000 Ethernet Managed Switch User Manual User Manual
Page 41

Rockwell Automation Publication 1783-UM001D-EN-P - January 2013
41
Network Services Setup
Chapter 2
Email and SMS Error Codes
Examine the destination element of the email MSG to see if the email was
successfully delivered to the mail relay server.
This indicates that the mail relay server placed the email message in a queue for
delivery. It does not mean the intended recipient successfully received the email
message.
This table shows possible codes that could be in this destination element.
Table 4 - Error Codes
Error Code (hex)
Extended-error Code
(hex)
Description
0x00
None
Delivery successful to the mail relay server.
0x02
Resource unavailable. The email object was unable to obtain
memory resources to initiate the SMTP session.
0x08
Unsupported Service Request.
Make sure the service code is 0x4B and the class is 0x32F.
0x11
Reply data too large. The Destination string must reserve
space for the SMTP server reply message.
The reply can be 470 bytes max.
0x13
Configuration data size too short. The Source Length is less
than the Source Element string size plus the 4-byte length.
The Source Length must equal the Source Element string size
+ 4.
0x15
Configuration data size too large. The Source Length is greater
than the Source Element string size plus the 4-byte length.
The Source Length must equal the Source Element string size
+ 4.
0x19
Data write failure.
An error occurred when attempting to write the SMTP server
address (attribute 4) to nonvolatile memory.
0xFF
0x0100
Error returned by email server; check the Destination string
for reason. The email message was not queued for delivery.
0x0101
SMTP mail server not configured. Attribute 5 was not set with
a SMTP server address.
0x0102
To: address not specified.
Attribute 1 was not set with a To: address with no To: field
header in the email body.
0x0103
0x0103 From: address not specified. Attribute 2 was not set
with a From: address and no From: field header in the email
body.