C - technical specifications, Product approvals, Ce certification – Rockwell Automation 1403-DM_LM_MM Powermonitor II Instruction Sheet User Manual
Page 77: On c-1, Technical specifications, Appendix
![background image](/manuals/578470/77/background.png)
1403-IN001A-US-P
Appendix
C
Technical Specifications
Product Approvals
UL 508 listed, File E96956, for Industrial Control
Equipment and CSA C22.2 Certified.
CE Certification
If this product bears the CE marking, it is approved
for installation within the European Union and EEA
regions. It has been designed and to meet the
following directives.
EMC Directive
This product is tested to meet Council Directive 89/
336/EEC Electromagnetic Compatibility (EMC) and
the following standards, in whole in part,
documented in a technical construction file:
• EN 50081-2 - Generic Emission Standard, Part
2 - Industrial Environment
• EN 50082-2 - Generic Immunity Standard, Part
2 - Industrial Environment
This product is intended for use in an industrial
environment.
Low Voltage Directive
This product is tested to meet Council Directive 73/
23/EEC Low Voltage, by applying the safety
requirements of IEC 1010-1.
This equipment is classified as open equipment and
must be installed (mounted) in an enclosure during
operation as a means of providing safety protection.
International Standard IEC 529 / NEMA / UL
508 Degree of Protection
The Bulletin 1403 Master Module is rated as IP10
degree of protection per International Standard IEC
529. It is considered an open device per NEMA and
UL 508.
The Bulletin 1403 Display Module is rated as IP65
degree of protection per International Standard IEC
529. It is rated as Type 4X (Indoor) per NEMA and
UL 508.
Follow the recommended installation guidelines to
maintain these ratings.
ANSI/IEEE Tested (1403-MM only)
Meets or exceeds the Surge Withstand Capability
(SWC) C37.90.1 - 1989 for protective relays and
relay systems on all power connection circuit
terminations.
Metering Update Rates (1403-MM only)
Filter
Mode
Min/Max Log
Functionality
Number of
Configured
Setpoints
Snapshot
Log
Interval
Real Time
Metering
Update
Rate (mS)
1
Disabled
0
Disabled
28
1
Enabled
20
1/Second
46
2
Disabled
0
Disabled
52
2
Enabled
20
1/Second
67
3
Disabled
0
Disabled
69
3
Enabled
20
1/Second
87