Rockwell Automation 1403-DM_LM_MM Powermonitor II Instruction Sheet - Manual (Page 62)

4-26 General Operation
1403-IN001A-US-P
Table 4.14 Snapshot Log Parameters for the Power Block
Parameter Description Range Default
Phase 1 Power Power of phase 1 signed to show direction.
0 to 999.9x10
22 Watts
Phase 2 Power Power of phase 2 signed to show direction.
0 to 999.9x10
22 Watts
Phase 3 Power Power of phase 3 signed to show direction.
0 to 999.9x10
22 Watts
3-Phase Total Power Total power of phase 1, 2, and 3 signed to show direction.
0 to 999.9x10
22 Watts
Phase 1 Reactive Power Reactive power of phase 1 signed to show direction.
0 to 999.9x10
22 Vars
Phase 2 Reactive Power Reactive power of phase 2 signed to show direction.
0 to 999.9x10
22 Vars
Phase 3 Reactive Power Reactive power of phase 3 signed to show direction.
0 to 999.9x10
22 Vars
3-Phase Total Reactive Power Total reactive power of phases 1 to 3 signed to show direction. 0 to 999.9x10 22 Vars
Phase 1 Apparent Power Apparent power of phase 1.
0 to 999.9x10
22 VA
Phase 2 Apparent Power Apparent power of phase 2.
0 to 999.9x10
22 VA
Phase 3 Apparent Power Apparent power of phase 3.
0 to 999.9x10
22 VA
3-Phase Total Apparent Power Total apparent power of phase 1, 2, and 3.
0 to 999.9x10
22 VA
Phase 1 True Power Factor The ratio between the power and apparent power for phase 1;
this value is signed to show lead (+) or lag (-). -100 to 100 Percent
Phase 2 True Power Factor The ratio between the power and apparent power for phase 2;
this value is signed to show lead (+) or lag (-). -100 to 100 Percent
Phase 3 True Power Factor The ratio between the power and apparent power for phase 3;
this value is signed to show lead (+) or lag (-). -100 to 100 Percent
Total True Power Factor The ratio between the power and apparent power for phase 1,
2, and 3; this value is signed to show lead (+) or lag (-). -100 to 100 Percent
Phase 1 Distortion Power Factor The ratio between the magnitude of the fundamental and the
sum of the magnitudes for all of the current harmonics for
phase 1.
(1)
0 to 100 Percent
Phase 2 Distortion Power Factor The ratio between the magnitude of the fundamental and the
sum of the magnitudes for all of the current harmonics for
phase 2.
1
0 to 100 Percent
Phase 3 Distortion Power Factor The ratio between the magnitude of the fundamental and the
sum of the magnitudes for all of the current harmonics for
phase 3.
1
0 to 100 Percent
Total Distortion Power Factor The ratio between the magnitude of the fundamental and the
sum of the magnitudes for all of the current harmonics for
phase 1, 2, and 3.
1
0 to 100 Percent
Phase 1 Displacement Power
Factor The cosine of the difference between the phase angle of the
fundamental voltage and current for phase 1; this value is
signed to show lead (+) or lag (-).
1
-100 to 100 Percent
Phase 2 Displacement Power
Factor The cosine of the difference between the phase angle of the
fundamental voltage and current for phase 2; this value is
signed to show lead (+) or lag (-).
1
-100 to 100 Percent
Phase 3 Displacement Power
Factor The cosine of the difference between the phase angle of the
fundamental voltage and current for phase 3; this value is
signed to show lead (+) or lag (-).
1
-100 to 100 Percent
Total Displacement Power Factor The cosine of the difference between the phase angle of the
fundamental voltage and current for phase 1, 2, and 3; this
value is signed to show lead (+) or lag (-).
1
-100 to 100 Percent
(1) This value has the same update rate as the harmonic analysis.