Rockwell Automation 1403-NENET Ethernet Communication Card Installation Instructions - Manual (Page 77)

1 Publication 1403-IN005A-EN-P
Appendix
D
Technical Specifications
Product Approvals UL 508 Component Recognized File E96956 and CSA C22.2 approval for
Industrial Control Equipment.
Revenue Meter Compliance Meets ANSI C12.16 - 1991 and IEC 1036 Class 1 requirements for accuracy.
Consult local Rockwell Automation sales office for additional information.
Compliance to European
Union Directives If this product has the CE mark it is approved for installation within the
European Union and EEA regions. It has been designed and tested to meet the
following directives.
EMC Directive
This product is tested to meet Council Directive 89/336/EEC Electromagnetic
Compatibility (EMC) and the following standards:
•
EN 50081-2 - Generic Emission Standard, Part 2 - Industrial Environment
(Class A)
•
EN 50082-2 - Generic Immunity Standard, Part 2 - Industrial Environment
This product is intended for use in an industrial environment.
Low Voltage Directive
This product is tested to meet Council Directive 73/23/EEC Low Voltage, by
applying the safety requirements of IEC 1010–1.
This equipment is classified as open equipment and must be installed
(mounted) in an enclosure during operation as a means of providing safety
protection.
Screw Torque and Wire Size
Position Ratings
Mounting Screw Tightening Torque 0.9 to 1.1 Nm (8 to 10 lb–in.)