Set values, Table 3.b, Set values overview – Rockwell Automation 825 Smart Motor Manager User Manual User Manual
Page 35

Functions 3-2
Publication 825-UM001B-EN-P January 2001
Set Values
The parameters “Main Settings” and “Special Settings” must be programmed for every
application. The other parameters (e.g., “High Overload”, “Asymmetry”) have factory-set
values, which are correct for most applications.
Table 3.B Set Values Overview
Parameter List
Option
Card
Cat. No.
Page
Parameter List
Option
Card
Cat. No.
Page
DELAY AUX REL # 2
825-MST
EARTH FAULT CORE WARNING 825-MST
SHORT CIRCUIT PROTECTION 825-MST
PHASE REVERSAL TRIP
825-MLV
PT100 PROTECTION
PT100 RESET/WARNING
ATTENTION
!
All parameters can be set, including those functions associated with
option boards that have not been mounted in the device. However,
these warning and trip functions are not operational unless the
corresponding option board is installed.