Rockwell Automation 825 Smart Motor Manager User Manual - Manual (Page 128)

7-2 Testing and Maintenance
Publication 825-UM001B-EN-P January 2001
Indication of Recorded Values
All important statistical data can be read on the LCD of the basic unit. Refer to page 3-8 for
procedure.
From the recorded values, data can be used to determine:
• Running time of the motor, the Smart Motor Manager, contactor, etc.
• Necessary service jobs
• Operational behavior of motor and installation
• Causes shortly before tripping and the moment of tripping
• Misuse information, such as too many emergency starts, etc.
The table below lists the recorded values accessible from the Smart Motor Manager.
Table 7.A List of Recorded Values
LCD Description
Mode: Recorded values
Total basic unit running time (including interruption of control voltage) in
hours, minutes
Total motor running time in hours, minutes
Time since last start in hours, minutes
Time since one start prior to last start in hours, minutes
Time since two starts prior to last start in hours, minutes
Time since three starts prior to last start in hours, minutes
Time since four starts prior to last start in hours, minutes
Time since last trip in hours, minutes
RECORDED VALUES
825-M MAIN TIME
--- H -- MIN
MOT RUNNING TIME
--- H -- MIN
SINCE LAST START
--- H -- MIN
SINCE 1PRV START
--- H -- MIN
SINCE 2 PRV START
--- H -- MIN
SINCE 3 PRV START
--- H -- MIN
SINCE 4 PRV START
--- H -- MIN
SINCE LAST TRIP
--- H -- MIN