Rockwell Automation 825 Smart Motor Manager User Manual - Manual (Page 119)

Setting the Operational Parameters 5-16
Publication 825-UM001B-EN-P January 2001
Table 5.D Cat. No. 825-M… Operating Parameters (Continued)
➊ If auxiliary relays #2 and #3 are assigned to the communication (refer to page 5-16 ) they cannot be selected
here.
➋ If Factory Settings is set to “Not Reset To”, the programming menu skips to parameter End Set Value.
Group
Required
Option Card
Cat. No.
LCD
Setting
Range
Description
Communication
setting
—
0…63
0…63
1…247
1…126
Basic unit station number
(DeviceNet)
(R I/O)
(MODBUS)
(PROFIBUS)
—
0…2
0…23
0…182
0…4
Baud rate
(DeviceNet)
(R I/O)
(MODBUS)
(PROFIBUS)
Relay control
Comm. option,
825-MST
No/Yes ➊
Control of relays #2 and #3
via communication allowed
Clear recorded
values
—
Not clear/
all clear
Clear/do not clear all
recorded values
Reset settings to
factory settings
(clear recorded
values)
—
Not reset to/
All reset to
➋
Reset/not reset to factory
settings
— No/Yes
Reset/not reset all
parameters to factory
settings
— —
Confirmation that all
parameters are reset to the
factory settings
End of setting
parameters
—
End of setting operating
parameters
STATION NUMBER
02
BAUD RATE
04
REL #2-3 VIA COM
NO
CLEAR REC VALUES
NOT CLEAR
FACTORY SETTINGS
NOT RESET TO
ARE YOU SURE?
NO
FACTORY SETTINGS
ALL IS RESET TO
END SET VALUES