Rockwell Automation 193-DNCT DeviceNet Configuration Terminal User Manual - Manual (Page 79)

Rockwell Automation Publication 193-UM009B-EN-P - February 2013 75
Terminal Setup Menu Chapter 17
Function Key Setup Screen
LCD Contrast This screen is used to change the contrast of the 193-DNCT LCD. The Inc/Dec
keys are used to increase or decrease the contrast of the LCD.
Current key (F1)
being configured.
Press Inc/Dec to
change keys
CIA Copy and
Paste is
available for
this menu Class, Instance,
Attribute
Information. Values
Value sent when the
key is pressed,
ON (1) or OFF (0)
Save will appear after
changing the settings
for any key, Pressing
Enter will save the
information for all the
keys
Mode of key,
Momentary or
Maintained
Class, Instance,
Attribute
Information.
Values are
entered in
Hexadecimal.
CIA Copy and
Paste is
available for
this menu Press Inc/Dec from
the F4 setup screen
to get to the Reset
key setup
The default for the
Reset key is the Clear
Fault attribute of the
Control Supervisor
Object
Sample text to view
when adjusting the
contrast
This bar graph
indicates the
LCD’s contrast
setting,
0…100%