Rockwell Automation 193-DNCT DeviceNet Configuration Terminal User Manual - Manual (Page 53)

Rockwell Automation Publication 193-UM009B-EN-P - February 2013 49
Chapter
12
DeviceLogix™ Functionality
DeviceLogix™ Functionality The Configuration Terminal allows the operator to monitor, edit or delete
DeviceLogix™ programs for devices that support DeviceLogix™. DeviceLogix™
can also be enabled or disabled for a device. The DeviceLogix™ functions can be
accessed through the DeviceLogix™ Choices Menu, which is accessed by pressing
Enter
from the Advanced Functions Menu while the DevLogix menu item is
selected.
DeviceLogix™ Choices Menu The DeviceLogix™ Choices Menu is shown below:
DeviceLogix™ Monitor This function allows the operator to view a DeviceLogix™ program, including all
programmed function blocks, Discrete Output Points (DOP) and Produced
Network Bits (PNB). Text string for inputs, outputs, PNBs, and fault bits are
displayed for devices that support the DeviceLogix™ Data Table Object. The
counter and timer preset and accumulator value’s can be modified when selected.
To view each function block, use the INC/DEC keys to move to the next
function block. When the last programmed function block is reached, pressing
the INC key will advance the screen to the Programmed DOP screen. Pressing
the INC key again will then display the Programmed PNB screen and if the INC
key is pressed a third time, the first function block will be displayed again. When
viewing Function Blocks, the screen will have the following formats:
Only available if the
DeviceLogix™
DataTable Object is
supported in the
currently selected
device
Currently
selected
function