Rockwell Automation 193-DNCT DeviceNet Configuration Terminal User Manual - Manual (Page 56)

52 Rockwell Automation Publication 193-UM009B-EN-P - February 2013
Chapter 12 DeviceLogix™ Functionality
DeviceLogix™ Monitor. To create, edit or delete a program element, use the INC/
DEC
keys to navigate to the item to create/edit and then press the Enter key. To
edit one of the inputs of a function block, use the SEL key to highlight the input
and then press the Enter key. To invoke the DeviceLogix™ Editor, select the Edit
item in the DeviceLogix™ Choices Menu and press the Enter key.
Creating a New Function
Block Consider the following example of creating a new AND gate function block.
First, invoke the Device Logix editor. One of two displays will appear, either a
display of a function block or a screen displaying “No FB’s programmed”. At this
point press the Enter key and the following screen appears:
Press the Enter key to create a new function block. Now that a new function
block has been created, the type of function block must be selected. The
following screen will appear:
Use the INC/DEC keys to select the new function block type. Press the Enter
key when the desired function block type is selected. The following screen will
appear (the Boolean type screen is shown below. Other similar screens appear for
other function bock types.)
The Edit and Delete choices are only
present if there are function blocks
already programmed