Preface, Introduction, Component kits – Rockwell Automation 20B PowerFlex 700 Drive - Frame 7 Components Replacement User Manual
Page 7: Introduction component kits

Rockwell Automation Publication 20B-IN017B-EN-P - September 2011
7
Preface
Introduction
This publication provides guidelines for replacing the major components in the
PowerFlex 700 Frame 7 drive.
Component Kits
All kits include necessary components, ESD wrist strap and hardware (if
required), and thermal grease (if required).
Refer to the master parts list for the most up-to-date information:
Description
Kit Catalog No.
Notes
Precharge Board
SK-G9-PRE1-V480
AC input
1336-PB-SP22C
DC input
Main Control Board
SK-G9-VMCB1-D0
115V I/O
SK-G9-VMCB1-C0
24V I/O
T-Comm Board
SK-G9-TCOMM
Switch Mode Power Supply Board
SK-G9-PWRS1-D0
Power Interface Board
SK-G9-GDB1-D292
292A Drives
SK-G9-GDB1-D325
325A Drives
Heatsink Fan
SK-G1-FAN1-F7
Heatsink Fan Transformer
1336-T-SP5A
480 to 120 Auto transformer (fan only)
Current Transducer
SK-G1-CT1-F7
Includes one Transducer.
Inverter Power Module (IGBT)
SK-G1-QOUT1-F7
Includes
·Two IGBTs.
·Two Gate Interface Boards.
Inverter Snubber Kit
SK-G1-INVSNB1-F7
Includes:
·One Snubber Board.
·One Resistor.
SCR Snubber Kit
SK-G1-SCRSNUBRB
AC input requires three kits.
DC input requires one kit.
Converter Power Module (SCR)
SK-G1-SCR1-F7
AC input.
Kit includes three SCR Modules.
DC Precharge SCR Module
SK-G1-SCR2-F7
DC input.
Kit includes one SCR Module
Thermal Sensors
SK-G1-THM1-F7
Includes:
·Main Control Panel Thermal Sensor
·Heatsink Thermal Sensor.
Bus Fuse
1336-F1-SP6A
Bus Capacitor
SK-G1-BUSCAP1-F7
Includes one Capacitor.
MOV
SK-G1-MOV1-F7
AC input.
DC Link Choke
SK-G1-DCCHOKE1-F7
AC input.
Balancing Resistor
1336-RLOAD-SP4A
Includes one Resistor.