Yamato Scientific DNF 910 Constant Temperature Ovens - Manual (Page 54)

50
Operation Method
Set Fan Operation at Wait State
1 Select the item in function menu
• Check that the power in turned on.
FUNCTION
TROUBLE
ENTER CANCEL
DOOR Fan (standby) ON
①
Press the FUNCTION key. The function menu
starts and the Sub Display displays the items.
Select the item using the FUNCTION key.
②
Display the "Fan (standby)" and press the
ENTER key.
2 Select mode
Fan (standby) ON
↓
Fan (standby) OFF
①
The "" (cursor) goes out and the mode currently
selected blinks instead. Display the "ON" or
"OFF" using the "▼▲".
3 Set fan operation
TROUBLE
ENTER CANCEL
DOOR Fan (standby) OFF
①
Press the ENTER key. The fan operation is
decided and the function menu selection screen
is displayed.
™ The fan rotates during the standby state when the
"Fan (standby)" is set to "ON". It does not rotate if
set to "OFF".
™ The rotation speed of fan depends on the setting
value in "Fan speed".