Yamato Scientific DNF 910 Constant Temperature Ovens - Manual (Page 37)

33
Operation Method
Input Program; Add Step
1 Step addition procedure
①
Display the setting of un-used step on the setting item selection screen and then press the
ENTER key.
TROUBLE
ENTER CANCEL
DOOR Set TEMP 0℃
S23(un-used)
™ The "SO1" (the first step) indicates "un-used" at the first registration of program.
™ The items other than "Insert step", "Delete step" and "End program" can be set.
™ The "un-used" steps are not displayed if no steps are left.
②
Change the setting value and press the ENTER key.
③ The indication "un-used" on the lower column of Sub Display goes out.
TROUBLE
ENTER CANCEL
DOOR Set TEMP 0℃
S23
④
Set the other items respectively.
⑤ Press the PROGRAM key to display the next selection screen after step addition is completed.