Operation method, Input program; set the temperature – Yamato Scientific DNF 910 Constant Temperature Ovens User Manual
Page 31

27
Operation Method
Input Program; Set the Temperature
1
Temperature setting procedure
①
Select the "Set TEMP" and press the ENTER key. The temperature setting edition screen is
displayed. The blinking "" (cursor) goes out and the setting value blinks instead.
Set TEMP
► 0℃
S01
Set TEMP
0℃
S01
ENTER
(Selection screen)
→
(Edition screen)
②
Select the temperature using "▼▲" and press the ENTER key. The setting is decided and the
screen returns to the setting item selection screen.
TROUBLE
ENTER
CANCEL
DOOR
Set TEMP
100℃
S01
→
TROUBLE
ENTER
CANCEL
DOOR
Set TEMP
100℃
S01
(Decide the input)
(Selection screen)
③
Press the CANCEL key to cancel the input. The value is cancelled and the screen returns to the
setting item selection screen.
TROUBLE
ENTER
CANCEL
DOOR
Set TEMP
45℃
S01
→
TROUBLE
ENTER
CANCEL
DOOR
Set TEMP
0℃
S01
(Cancel the input)
(Selection screen)
④
Press the PROGRAM key to display the next selection screen after the temperature setting is
completed.