Yamato Scientific DNF 910 Constant Temperature Ovens - Manual (Page 33)

29
Operation Method
Input Program; Set the Fan Rotation Speed
1 Fan rotation speed setting procedure
①
Select the "Fan" and press the ENTER key. The setting edition screen is displayed. The
blinking "" (cursor) goes out and the setting value blinks instead.
Fan ► 10
S01
Fan 10
S01
ENTER
(Selection screen)
→
(Edition screen)
②
Select the value using "▼▲" and press the ENTER key. The setting is decided and the screen
returns to the setting item selection screen.
TROUBLE
ENTER CANCEL
DOOR Fan 8
S01
→
TROUBLE
ENTER CANCEL
DOOR Fan 8
S01
(Decide the input) (Selection screen)
③ Press the CANCEL key to cancel the input. The value is cancelled and the screen returns to the
setting item selection screen.
TROUBLE
ENTER CANCEL
DOOR Fan 2
S01
→
TROUBLE
ENTER CANCEL
DOOR Fan 10
S01
(Cancel the input) (Selection screen)
④ The fan stops at the same time of operation completion if "OFF" is selected at period setting of
"End". The "OFF" can be selected only when the period is set to "End".
⑤ Press the PROGRAM key to display the next selection screen after the setting of fan rotation
speed is completed.