Operation method, Input program; set the repeat count – Yamato Scientific DNF 910 Constant Temperature Ovens User Manual
Page 35

31
Operation Method
Input Program; Set the Repeat Count
1
Repeat count setting procedure
①
Select the "Rep. count" and press the ENTER key. The setting edition screen is displayed. The
blinking "" (cursor) goes out and the setting value blinks instead.
Rep. count
► Endless
S07
Rep. count
Endless
S07
ENTER
(Selection screen)
→
(Edition screen)
②
Select the value using "▼▲" and press the ENTER key. The setting is decided and the screen
returns to the setting item selection screen.
TROUBLE
ENTER
CANCEL
DOOR
Rep. count
1
S07
→
TROUBLE
ENTER
CANCEL
DOOR
Rep. count
1
S07
(Decide the input)
(Selection screen)
③
Press the CANCEL key to cancel the input. The value is cancelled and the screen returns to the
setting item selection screen.
TROUBLE
ENTER
CANCEL
DOOR
Rep. count
3
S07
→
TROUBLE
ENTER
CANCEL
DOOR
Rep. count
Endless
S07
(Cancel the input)
(Selection screen)
④
Press the PROGRAM key to display the next selection screen after the repeat count setting is
completed.