Weidmuller WI-I/O-9-U2: Wireless Mesh I/O & Gateway User Manual V1.2.2 - Manual (Page 87)

86
4.4.7 System Tools Web page
Figure 72 – System Tools
System Log File
Logs system instructions, etc to the screen where the log screen can be saved to a file.
Not normally used, however maybe used by Technical Support to diagnose problems.
The “Clear System Log” clears the log screen.
Reading Configuration File
Reads the module configuration into an XML file. This file can be saved by selecting
“Save As” from the File menu.
Writing Configuration File
Allows a previously saved XML configuration file to be loaded back into the module.
Firmware Upgrade
– Web Page (Patch File Upgrade)
This option allows the module firmware to be upgraded locally using a firmware patch
file. The process is done by
selecting “Firmware update” from the ‘System Tools’ web
page and then browsing for the saved firmware patch file.
Locate the firmware file by selecting the ‘Browse’ button and when found press the
“Send” button which will upload the file to the module. You will get an indication that it
was successful or not, if successful
press the “Reset” button, if unsuccessful try again.
The module will do some checks to ensure the file is valid before a reset can be
initiated.
Note: All existing configuration parameters will be saved however if any
new parameters are added to the firmware the default values will be used.