Titus Sensor STE-8001 and STE-8201 - Manual (Page 9)

STE-8001 and STE-8201 sensors
Revision A
Installing STE-8000 sensors
Maintenance
9
4. Insert the Ethernet cable coming from the base into the sensor.
5. Place the top of the sensor over the top of the mounting base and swing it
down over the Allen screw brackets. Be careful not to pinch any wiring.
6. Back the Allen screws out of the brackets until they engage the sensor cover
and hold it in place.
Maintenance
Remove dust as necessary from holes in top and bottom. Clean the display with
soft, damp cloth and mild soap.