Titus Sensor STE-8001 and STE-8201 - Manual (Page 11)

Revision A 11
SECTION 3
User functions
This section covers topics for the end user in a facility.
User functions are limited to changing the occupied temperature setpoints from
the STE-8000.
Operating the
STE-8000
The functions are accessible through an STE-8000 series sensor. The functions are
entered or changed using the buttons and display on the front of the STE-8000.
◆ Pressing either the up button or down button changes a selection,
setting, or value.
◆ Pressing the setpoint button saves the setting or value. Typically saving
an entry also advances to the next display.
Note
An STE-8000 series sensor will display time if the controller to which it is
attached has been synchronized with system time within the previous 24
hours.
Illustration 3-1 The STE-8000 series display and buttons
Set
Point
Set
Point
7O
12O2
LCD display with
temperature and time
UP and down
buttons
Setpoint button
Motion sensor
(STE-8201 only)