STEMCO Aeris - Manual (Page 32)

Aeris Installation and Service Manual
Page 32 of 42
Figure 27
Description of Parts Available in Light Kits
Item Description
1. Wire Extension for light Used to connect light to light and 7 pin power box.
2. 10 X 1 1/4” Self Tap screw Used to attach light and P-clamps to trailer
3. P-Clamps
Used to clamp down wire from light to trailer and to 7 pin power box
4. Wire Ring Terminal Connectors for end of wires to 7 pin power box.
5. Wire Butt Splice Used to connect light black wire to yellow wire from controller box
6. Light Pigtail Used to connect light to wire extension to 7 pin power box.
7. Light Aeris signal indicator lamp and or SmartSense signal indicator lamp
8. Spacer Used for mounting lamp11
9. 6” Tie-wraps Used to secure wiring and airlines to trailer components.
1
2
1
4 5
6
7
8
9
1
0
2
1
Aeris Standard Kit
Item Qty
1. 1 - Wire Extension for light
2. 7 - 10 X 1 1/4” Self Tap screw
3. 5 - P-Clamps
4. 3 - Wire Ring Terminal
5. 1 - Wire Butt Splice
6. 1 - Light Pigtail
7. 1 - Driver Warning Light
8. 1 - Spacer
9. 25 - 6” Tie-wraps
Aeris SmartSense Kit
Item Qty
1. 1 - Wire Extension for light
2. 7 - 10 X 1 1/4” Self Tap screw
3. 5 - P-Clamps
4. 3 - Wire Ring Terminal
5. 1 - Wire Butt Splice
6.
7. 1 - SmartSense Driver Warning Light
8.
9. 25 - 6” Tie-wraps
3
7
3
4 5 9