RKI Instruments Pioneer 4W - Manual (Page 90)

Oxygen Transmitter • 14 Pioneer Operator’s Manual (PRELIMINARY)
Alarm 1 setpoint screen
This screen indicates the setpoint and alarm type for Alarm 1. The default setting for the
alarm 1 setpoint for the oxygen channel is
19.5 . The default setting for the alarm type is
FALL .
• To accept the settings and continue the program, press the ENTER button two times.
The program displays the Alarm 2 Setpoint screen.
• To update the alarm 1 setpoint:
1. Use the UP/YES and DOWN/NO buttons to change the setpoint.
2. Press the ENTER button two times to accept the new setting and continue the
program.
The program displays the Alarm 2 Setpoint screen.
• To update the alarm type setting:
1. Press the ENTER button to select the alarm type setting. (The setting flashes when
it is selected.)
2. Use the UP/YES or DOWN/NO button to change the setting.
3. Press the ENTER button to accept the new setting and continue the program.
The program displays the Alarm 2 Setpoint screen.
Alarm 2 setpoint screen
This screen indicates the setpoint and alarm type for Alarm 2. The default setting for the
alarm 2 setpoint for the oxygen channel is
17.0 . The default setting for the alarm type is
FALL .
• To accept the settings and continue the program, press the ENTER button two times.
The program displays the Alarm 3 Setpoint screen.
• To update the alarm 2 setpoint:
1. Use the UP/YES and DOWN/NO buttons to change the setpoint.
2. Press the ENTER button two times to accept the new setting and continue the
program.
The program displays the Alarm 3 Setpoint screen.
• To update the alarm type setting:
1. Press the ENTER button to select the alarm type setting. (The setting flashes when
it is selected.)
2. Use the UP/YES or DOWN/NO button to change the setting.
3. Press the ENTER button to accept the new setting and continue the program.
The program displays the Alarm 3 Setpoint screen.
C h a n n e l 1 A l a r m
5 % V O L O X Y
F A L L
1
. 1 9
C h a n n e l 1 A l a r m
7 0 % V O L O X Y
A
2
F L L
. 1